Regular maintenance for certain parts is essential for long life and faultless functioning of the equipment. Routine maintenance ensuring safe operation includes cleaning, disinfection and visual control of general condition of the equipment.

Routine maintenance consists of cleaning the water system of the bath and the steam generator of the cocoon.

 

NB! Before using the equipment and composing the maintenance plan, the general quality and hardness of the water must be assessed.

 

In case of low quality water (high contents of limestone, iron, abrasive particles etc.), the installation of an appropriate water filter is required. The frequency of cleaning the steam generator is directly dependent on the hardness of water.

The warranty will be voided if maintenance is carried out non-systematically and only upon necessity.

Try to avoid scratching the acrylic surface with hard elements (sand, jewelry, accessories, etc.). Do not drop heavy and hard objects on the surface of the device.

 

Water system cleaning

 The cleaning of the water system of the bath (jets, pumps, and pipes) needs to be carried out as required, but no less than after every 50 sessions.

 

Steam generator cleaning

In order to compose the maintenance plan for the steam generator cleaning, the general quality and hardness of the water must be assessed. We recommend performing a Vital Easytest.

TOTAL HARDNESS GERMAN WATER CHARACTERISTICS SERVICE SCHEDULE
< 5TH <3˚ dH Very soft water After every 500 work hours
>7 TH >4˚ dH Soft water After every 150 work hours
>12TH >7˚ dH Semi hard water After every 50 work hours
>25TH >14˚ dH Hard water Aster every 15 work hours
>35TH >21˚ dH Very hard water Install water filter